Waltech Model 32 DAQ configuration calculator with firmware V.14

Mask 0:
bit0: channel 0 single ended
bit1: channel 1 single ended
bit2: channels 0,1 differential
bit3: channel 2 single ended
bit4: channel 3 single ended
bit5: channels 2,3 differential
bit6: channel 4 single ended
bit7: channel 5 single ended
Decimal:

Mask 1:
bit0: channels 4,5 differential
bit1: channel 6 single ended
bit2: channel 7 single ended
bit3: channels 6,7 differential
bit4: channel 8 single ended
bit5: channel 9 single ended
bit6: channels 8,9 differential
bit7: channel 10 single ended
Decimal:

Mask 2:
bit0: channel 11 single ended
bit1: channels 10,11 differential
bit2: channel 12 single ended
bit3: channel 13 single ended
bit4: channels 12,13 differential
bit5: channel 14 single ended
bit6: channel 15 single ended
bit7: channels 14,15 differential
Decimal:

Mask 3:
bit0: 10 bit ADC channel 0
bit1: 10 bit ADC channel 1
bit2: 10 bit ADC channel 2
bit3: 10 bit ADC channel 3
bit4: 10 bit ADC channel 4
bit5: 10 bit ADC channel 5
bit6: 10 bit ADC channel 6
bit7: 10 bit ADC channel 7
Decimal:

Mask 4:
bit0: channel 1 thermocouple amp
bit1: channel 3 thermocouple amp
bit2: channel 5 thermocouple amp
bit3: channel 7 thermocouple ampl
bit4: channel 9 thermocouple amp
bit5: channel 11 thermocouple amp
bit6: channel 13 thermocouple amp
bit7: channel 15 thermocouple amp
Decimal:

Mask 5:
bit0: 10 bit ADC channel 0 oversampling on
bit1: 10 bit ADC channel 1 oversampling on
bit2: 10 bit ADC channel 2 oversampling on
bit3: 10 bit ADC channel 3 oversampling on
bit4: 10 bit ADC channel 4 oversampling on
bit5: 10 bit ADC channel 5 oversampling on
bit6: 10 bit ADC channel 6 oversampling on
bit7: 10 bit ADC channel 7 oversampling on
Decimal:

Mask 6:
bit0: sample start on x.00 seconds
bit1: read ADC chip temp
bit2: channel 15 is also CO temp
bit3: channel 14 is also CO temp
bit4: channel 13 is also CO temp
bit5: channel 12 is also CO temp
bit6: read PM temp from RH sensor
bit7: not used
Decimal: