CAPABILITIES
|
|
|
 |
| A project starts out as a design in schematic form. | We use PCB cad software to create a board layout. |
Preview with a 3d rendering... |
 |
 |
 |
| Then We etch a prototype board, load it and test it. |
Once the board design demonstrated, we have a PCB manufacturer make a batch of baords. | Then we load those boards. |
|
|
|
|
| We write the firmware for the microprocessor, and load it on the chips. | Housings are them designed with CAD, and CNC milled. The devices are then assembled. |
Software for a computer is written if needed. After a final QC, the product us ready. |
